Cranston Electrical Company handles electrical repairs, panel upgrades, wiring, lighting, EV charger installation, and generator hookups for homes and businesses across Cranston and Providence County. Whether you own a single-family home, manage a rental property, or run a commercial space, we scope the job on the phone and confirm the price before anything is scheduled. Straight scheduling. Upfront pricing. Code-compliant wiring.
Call (401) 535-9265 for a quote.
We work with a local electrician for homeowners and commercial clients alike, seven days a week from 7:30 AM to 11:00 PM.
Good electrical work isn't complicated, it's just done right, and most electrical problems give you a clear signal before they become serious. A dead outlet, flickering lights, a breaker that trips repeatedly, a burning smell near a receptacle, or a panel that buzzes or hums are all worth a call. We look at what the symptom points to, trace it back to the source, and explain what we found before any work starts. That means you know what the problem is, what fixing it involves, and what it costs before we touch anything.
A breaker that keeps tripping is a warning worth heeding.
An undersized or failing panel affects everything downstream. We handle breaker panel repair, full panel replacements, and service upgrades from 100-amp to 200-amp service when the load demands it. A humming or warm panel, breakers that won't hold, or a box that runs out of slots are all reasons to have the panel looked at. We run load calculations to confirm what the service entrance needs to carry, and we give you straight answers about your panel and wiring before a dollar is spent.
Commercial properties with growing equipment loads or tenant buildouts often need panel capacity addressed early. We handle that side of the work too.
Electrical work like this comes up more than people expect, especially in homes that haven't had an update in a decade or more. We install standard and GFCI outlets in kitchens, bathrooms, garages, and anywhere near water where ground-fault protection is required. AFCI breakers go in where arc-fault protection is needed under current code. We also install USB outlets, dimmer switches, and smart switches when a homeowner wants more control over lighting and loads.
Dedicated circuits matter for appliances that draw consistent power: dryers, refrigerators, and the dedicated circuit that supplies power to a heating or cooling unit all benefit from a circuit sized for the load rather than shared with other draws. We run those circuits to panel and confirm the capacity is there before the work starts.
Older homes in Cranston frequently need wiring updated rather than just repaired. Knob-and-tube wiring and aluminum branch wiring are common finds during renovation work or inspections in this area, and both require more than a patch. We handle whole-house rewiring and targeted wiring upgrades when a full replacement is what the situation calls for. The local section below covers knob-and-tube and aluminum remediation in more detail.
We'll make your wiring safe again.
The homes and wiring in this area have their own quirks, and lighting is one of the places that shows it most. Older construction often lacks the recessed cans, junction boxes, or circuit capacity that modern lighting needs. We install recessed lighting, retrofit existing ceilings with LED recessed fixtures, add under-cabinet lighting in kitchens, and run new circuits where the existing wiring won't support the load.
Outdoor lighting is a frequent request: security lights, motion sensor fixtures, and landscape lighting all require weatherproof wiring and boxes rated for exterior use. We handle those installs to the standard the next inspection expects.
Ceiling fan installation and replacement rounds out a lot of residential calls. A fan without a dedicated switch leg or a box not rated for fan weight needs more than a swap, and we address the wiring side before the fixture goes up. For commercial clients, we handle commercial lighting installation across office, retail, and light industrial spaces where fixture type, circuit load, and code requirements all factor into the work.
We show up ready to work.
Rhode Island has some of the oldest housing stock in the country, and Providence County is no exception. Pre-war and mid-century construction in Cranston regularly surfaces knob-and-tube wiring during inspections, renovations, or insurance reviews. Knob-and-tube is ungrounded, lacks the insulation modern wiring requires, and is frequently flagged by home inspectors and insurers as a condition that needs to be addressed. Aluminum branch wiring from the 1960s and 1970s carries its own set of concerns at the connections and devices. We replace both, running new copper wiring to current code and updating outlets, switches, and panel connections as part of the work.
Rhode Island has one of the highest rates of EV adoption in the country, and home charging on a Level 2 charger is the practical choice for most commuters in the area. The job involves running a dedicated circuit from the panel to the garage or parking area, confirming the panel has the capacity to carry the added load, and installing the outlet or hardwired connection the charger requires. We run the load calculation before any wire is pulled and confirm what the panel can handle. Hire local and the wiring is done by someone who knows the area.
Real experience. Local knowledge. Ready to wire.
Nor'easters and ice storms hit Providence County hard enough that generator hookups are a consistent call every fall and winter. We handle the electrical side of a backup generator installation: the transfer switch, the dedicated circuit, and the panel connection that lets a generator supply power to the home without back-feeding the grid. Whole-home surge protection pairs well with a generator hookup, since power restoration after an outage can send a voltage spike through circuits and appliances. We can install a surge protection device at the panel as part of the same visit.
If you're not sure your panel can handle the load, that question is worth answering before equipment goes in, not after a breaker trips during business hours. We work with commercial clients on panel capacity, code-compliant wiring, lighting installation, and dedicated circuits for equipment across office, retail, and light industrial spaces. Electrical work done to the code inspectors here enforce is the standard we work to on every commercial job.
Code-correction wiring, outlet installation for workstations, and commercial lighting retrofits are all within scope. Call with what you need and we'll tell you what the job involves.
An electrical safety inspection covers the panel, the wiring, the outlets, and the grounding throughout the home. It's worth scheduling before a home sale, after a renovation, or when an older home hasn't had the wiring looked at in years. The inspection identifies what's working, what's out of date, and what needs attention, and you get a clear picture of the wiring before any work is proposed.
Whole-home surge protection installs at the panel and guards against voltage spikes that come in through the utility line. A single surge event can damage appliances, electronics, and sensitive equipment throughout the house. A panel-mounted surge device is a straightforward addition that covers every circuit in the home at once.
The price for any job is confirmed on the call, before anything is scheduled. We tell you what the work involves, what it covers, and what the rate is. You're not waiting until the visit to find out what something costs. Simple scheduling. Pricing agreed up front. Power back fast.
We're available every day from 7:30 AM to 11:00 PM. Whether you're calling about an outlet that stopped working, a panel that needs upgrading, or an EV charger you want installed before the weekend, the process starts with a phone call and a straight answer about what the job requires and what it costs.
Cranston is our primary service area, and we work throughout the surrounding communities in Providence County and the wider region. Nearby towns we serve include:
If you're in the area and need electrical work, call and we'll confirm whether your address is within our range.
Call (401) 535-9265 and describe what you are dealing with.
We go through the job on the phone, ask the right questions to understand the scope, and give you a price before anything is scheduled.
After we talk through the job and confirm the price, we find a time that works for your schedule. We work every day from 7:30 AM to 11:00 PM, so there is flexibility for most situations.
It depends on the current schedule and the nature of the call. For urgent electrical faults, we work to get to the job as quickly as the schedule allows. Call and we will tell you what is available.
The price is confirmed before the visit is scheduled, based on what you described on the call. If something about the job looks different once work is underway and we can see the full picture, we explain it before we proceed. Nothing changes without a conversation first.
The price depends on what the job involves, and the only accurate number comes from understanding the scope. When you call, we go through the job with you and give you the rate before anything is booked. Common calls include outlet and switch work, panel upgrades, EV charger installation, and rewiring projects, and each is priced based on what it actually requires.
A job can grow in scope when the wiring behind the wall is older than expected, when a panel is at capacity and needs to be upgraded alongside the original request, or when code requires additional protection devices such as AFCI or GFCI breakers. We identify those factors on the call or on-site and explain them before the work proceeds.
Homes built before the 1960s frequently have knob-and-tube wiring, and homes from the 1960s and 1970s may have aluminum branch wiring. Both are worth having looked at, especially if you have never had the wiring assessed, if a home inspector flagged it, or if an insurer has raised questions. An electrical safety inspection is the right starting point.
The electrician will confirm the scope of the work, look at the area involved, and get started once everything is clear. If anything on-site changes the picture from what was described on the call, that is discussed before any work begins. The goal is that there are no open questions by the time the job starts.
It depends on the job. Some work, such as replacing an outlet or switch on a circuit that can be isolated at the breaker, requires only a partial shutoff. Larger jobs like a panel replacement require the main power to be off for a period. We explain what to expect before the visit so you can plan for it.
Payment is handled at the time of the visit, once the work is complete. The price has already been confirmed before the visit, so there is nothing to negotiate at the door.
Call and we will work out what makes sense for your situation. Some jobs can proceed with arranged access, and others require someone present to confirm decisions during the work. We will let you know which applies when we scope the job.
Yes. We work with landlords and property managers on rental units, multi-family properties, and commercial spaces throughout Cranston and the surrounding area. The process is the same: scope the job on the call, confirm the price, and carry out the work to the standard a code inspection expects.
Cranston Electrical Company is available every day from 7:30 AM to 11:00 PM.
Call (401) 535-9265 to get a quote on any electrical repair, installation, or upgrade.
Tell us what you're dealing with, and we'll tell you what it takes to fix it.
Below is a plain-language breakdown of the electrical work we handle in Cranston and across Providence County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If your situation does not fit neatly into one row, call and we will talk through it.
| Type of Work | Scope of Work | When You Need It | Things to Know |
|---|---|---|---|
| Backup Generator Installation |
| Rhode Island homeowners planning for nor'easters and coastal power outages | The transfer switch is what makes a generator safe to use during an outage. We handle the full electrical side from the panel out. |
| Dedicated Appliance Circuits |
| Homeowners adding a major appliance or dealing with repeated trips on a shared circuit | Sharing a circuit between a major appliance and other loads puts stress on the wiring and causes tripping that a dedicated circuit eliminates. |
| Outlet & Switch Installation |
| Remodels, kitchen and bath updates, and older homes with too few outlets | Kitchen and bathroom outlets require GFCI protection under current code, and bedroom circuits in older homes often need AFCI breakers when outlets are added. |
| Breaker & Fuse Repair |
| Homes with a breaker that trips repeatedly or a fuse box still in service | A breaker that keeps tripping is a warning worth investigating, not just resetting. |
| Knob-and-Tube & Aluminum Rewiring |
| Cranston homes built before 1970 with original wiring still in place | Knob-and-tube circuits lack a ground wire and were not designed for modern household loads. Aluminum branch wiring loosens at connections over time as it expands and contracts with temperature. |
| Lighting Installation |
| Homeowners updating fixtures or adding outdoor lighting that was not originally wired | Exterior outlets and fixtures need weatherproof covers and GFCI protection regardless of the circuit they are on. |
| EV Charger Installation |
| Cranston homeowners adding a Level 2 charger in a garage or parking area | If the panel is already near capacity, a panel upgrade may be part of the conversation before the charger circuit is pulled. |
| Electrical Repairs & Troubleshooting |
| Homeowners dealing with a sudden or recurring electrical problem | We trace the fault and explain what we found before any repair work begins. |
| Wiring & Circuit Installation |
| Renovations, additions, and homes where wiring has been flagged during an inspection | Whole-home rewiring is a multi-day project. Partial rewires are scoped to what the home actually needs. |
| Basement & Sump-Pump Circuits |
| Cranston homeowners finishing a basement or replacing a sump pump on a shared circuit | A sump pump on a shared circuit is at risk of tripping during the exact conditions when it is needed most. |
| Electrical Panel UpgradesMost Popular |
| Older Cranston homes adding appliances, EV chargers, or additions | Many pre-1960s homes in this area are still on 60-amp or 100-amp service, which falls short of modern demand. |
| Electrical Safety Inspections |
| Buyers, sellers, landlords, and property managers in Providence County | If knob-and-tube or aluminum branch wiring is present, we document it and explain what remediation involves before any work is proposed. |
| Ceiling Fan Installation |
| Homes with a standard light fixture box that is not rated for fan weight | Most ceiling fan installs in older homes require replacing the existing box before the fan can go up safely. |
| Whole-Home Surge Protection |
| Homes with sensitive electronics or frequent utility events and lightning exposure | A panel-level surge protector is most cost-effective when added during a panel service call or upgrade, since the panel is already open. |
| Code-Correction Wiring |
| Landlords and property managers preparing a unit for inspection or a new tenant | We can work through a unit or building systematically and document corrections in a way that holds up to scrutiny. |
Call (401) 535-9265 to talk through your electrical situation and get a price before anything is scheduled.
(401) 535-9265